Officials from Guinness World Records today recognized DARPA’s Terahertz Electronics program for creating the fastest solid-state amplifier integrated circuit ever measured. The ten-stage common-source amplifier operates at a speed of one terahertz (1012 Hz), or one trillion cycles per second—150 billion cycles faster than the existing world record of 850 gigahertz set in 2012.
“Terahertz circuits promise to open up new areas of research and unforeseen applications in the sub-millimeter-wave spectrum, in addition to bringing unprecedented performance to circuits operating at more conventional frequencies,” said Dev Palmer, DARPA program manager. “This breakthrough could lead to revolutionary technologies such as high-resolution security imaging systems, improved collision-avoidance radar, communications networks with many times the capacity of current systems and spectrometers that could detect potentially dangerous chemicals and explosives with much greater sensitivity.”
Developed by Northrop Grumman Corporation, the Terahertz Monolithic Integrated Circuit (TMIC) exhibits power gains several orders of magnitude beyond the current state of the art. Gain, which is measured logarithmically in decibels, similar to how earthquake intensity is measured on the Richter scale, describes the ability of an amplifier to increase the power of a signal from the input to the output. The Northrop Grumman TMIC showed a measured gain of nine decibels at 1.0 terahertz and 10 decibels at 1.03 terahertz. By contrast, current smartphone technology operates at one to two gigahertz and wireless networks at 5.7 gigahertz
“Gains of six decibels or more start to move this research from the laboratory bench to practical applications—nine decibels of gain is unheard of at terahertz frequencies” said Palmer. “This opens up new possibilities for building terahertz radio circuits.”
For years, researchers have been looking to exploit the tremendously high-frequency band beginning above 300 gigahertz where the wavelengths are less than one millimeter. The terahertz level has proven to be somewhat elusive though due to a lack of effective means to generate, detect, process and radiate the necessary high-frequency signals.
Current electronics using solid-state technologies have largely been unable to access the sub-millimeter band of the electromagnetic spectrum due to insufficient transistor performance. To address the “terahertz gap,” engineers have traditionally used frequency conversion—converting alternating current at one frequency to alternating current at another frequency—to multiply circuit operating frequencies up from millimeter-wave frequencies. This approach, however, restricts the output power of electrical devices and adversely affects signal-to-noise ratio. Frequency conversion also increases device size, weight and power supply requirements.
DARPA has made a series of strategic investments in terahertz electronics through its HiFIVE, SWIFT and TFAST programs. Each program built on the successes of the previous one, providing the foundational research necessary for frequencies to reach the terahertz threshold.
# # #
Media with inquiries should contact DARPA Public Affairs at firstname.lastname@example.org
You are now leaving the DARPA.mil website that is under the control and
management of DARPA. The appearance of hyperlinks does not constitute
endorsement by DARPA of non-U.S. Government sites or the information,
products, or services contained therein. Although DARPA may or may not
use these sites as additional distribution channels for Department of
Defense information, it does not exercise editorial control over all of
the information that you may find at these locations. Such links are
provided consistent with the stated purpose of this website.
After reading this message, click to continue